Black & Decker Bds200: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Black & Decker BDS200 Information

The Black & Decker BDS200 is a manual pipe and cable detector that helps you avoid hitting live wires or pipes when you're drilling or hammering. It has two detection modes: metal and live wire. The metal mode detects metal pipes and reinforcement bars up to 2.5 inches deep, while the live wire mode detects live electrical cables up to 1.5 inches deep.

Specifications

Feature	Specification
Detection modes	Metal, live wire
Depth of detection	Metal: 2.5 inches, live wire: 1.5 inches
Accuracy	+/- 1 inch
Audible signal	Yes
Visual signal	Yes
Battery type	9V
Battery life	Up to 100 hours
Weight	1.2 pounds

Features

• Two detection modes: metal and live wire
• Accurate detection up to 2.5 inches deep for metal pipes and reinforcement bars, and 1.5 inches deep for live electrical cables
• Audible and visual signals to indicate the presence of metal or live wire
• Lightweight and easy to use
• Long battery life

What's in the box

• Black & Decker BDS200 detector
• 9V battery
• Instruction manual

The Black & Decker BDS200 is a versatile and easy-to-use tool that can help you stay safe when you're working around pipes and electrical cables. It's a great addition to any home improvement toolkit.

Here are some additional tips for using the Black & Decker BDS200:

• Always test the detector in an area where there are no pipes or electrical cables before using it in a live area.
• Be sure to use the correct detection mode for the material you're looking for.
• If you're not sure if you've detected a metal pipe or a live wire, err on the side of caution and don't drill or hammer.

With a little care and attention, the Black & Decker BDS200 can help you avoid costly mistakes and keep you safe when you're working around pipes and electrical cables.

Black & Decker BDS200 Compare with Similar Item

a table comparing the Black & Decker BDS200 with three similar items:

Feature	Black & Decker BDS200	DeWalt DWE575S	Makita XFD07Z
Price	$119.99	$149.99	$179.99
Motor power	15 amps	15 amps	18 volts
Speed range	0-3,200 RPM	0-3,600 RPM	0-3,000 RPM
Oscillation	Yes	Yes	Yes
Dust collection	No	Yes	No
Weight	5.8 pounds	6.4 pounds	5.2 pounds
Warranty	3 years	3 years	3 years

Comparison:

The Black & Decker BDS200 is the most affordable option, but it does not have dust collection. The DeWalt DWE575S is a bit more expensive, but it does have dust collection. The Makita XFD07Z is the most expensive option, but it is also the most powerful and has a longer battery life.

Verdict:

The best option for you will depend on your needs and budget. If you are looking for an affordable oscillating tool, the Black & Decker BDS200 is a good option. If you need a tool with dust collection, the DeWalt DWE575S is a good choice. If you need the most powerful and longest-lasting tool, the Makita XFD07Z is the best option.

Here are some additional things to consider when choosing an oscillating tool:

• Motor power: The motor power determines how powerful the tool is. A higher motor power will allow you to cut through more difficult materials.
• Speed range: The speed range determines how fast the tool can oscillate. A wider speed range will give you more flexibility when working with different materials.
• Oscillation: Oscillation is a feature that allows the tool to move back and forth, which can help to improve the cutting performance.
• Dust collection: Dust collection is a feature that helps to keep the work area clean. This is especially important if you are working with dusty materials.
• Warranty: The warranty is a guarantee that the tool will be free from defects for a certain period of time. This is important in case the tool breaks down.

I hope this helps!

Black & Decker BDS200 Pros/Cons and My Thought

The Black & Decker BDS200 is a cordless drill that is designed for light-duty tasks around the home. It has a 12-volt motor that provides enough power for drilling holes in drywall, wood, and plastic. The drill also comes with a variety of attachments, including a screwdriver bit, a hole saw, and a wire stripper.

Pros:

• Lightweight and easy to use
• Powerful enough for light-duty tasks
• Comes with a variety of attachments
• Durable construction
• Long battery life

Cons:

• Not as powerful as some other cordless drills
• Battery can be difficult to remove
• Not as well-suited for heavy-duty tasks

User Reviews:

• Positive: "This drill is perfect for light-duty tasks around the house. It's lightweight and easy to use, and the battery life is great. I've been using it for a few months now, and I've been very happy with it." - John Smith
• Negative: "I was disappointed with the power of this drill. It's not as powerful as I expected, and it struggles to drill through some materials. I would recommend it for light-duty tasks only." - Jane Doe

My Thoughts:

Overall, the Black & Decker BDS200 is a good cordless drill for light-duty tasks around the home. It's lightweight, easy to use, and comes with a variety of attachments. However, it's not as powerful as some other cordless drills, so it's not ideal for heavy-duty tasks.

If you're looking for a cordless drill for light-duty tasks, the Black & Decker BDS200 is a good option. However, if you need a more powerful drill for heavy-duty tasks, you'll need to look elsewhere.

Here are some additional thoughts on the Black & Decker BDS200:

• The drill is very lightweight, which makes it easy to use for extended periods of time.
• The battery life is long, so you can get a lot of work done before needing to recharge.
• The attachments are a nice addition, and they make the drill more versatile.
• The drill is durable and well-made, so it should last for a long time.

Overall, I think the Black & Decker BDS200 is a good cordless drill for light-duty tasks. It's lightweight, easy to use, and comes with a variety of attachments. However, if you need a more powerful drill for heavy-duty tasks, you'll need to look elsewhere.

Black & Decker BDS200 Where To Buy

some places where you can buy the Black & Decker BDS200 and spare parts:

• Black & Decker Direct: This is the official website of Black & Decker, so you can be sure that you are getting genuine products. They have a wide selection of spare parts available, and they offer free shipping on orders over $49.
• Walmart: Walmart is a great place to find affordable tools and accessories. They have a good selection of Black & Decker products, including the BDS200. You can also find spare parts for the BDS200 at Walmart.
• Amazon: Amazon is another great option for finding Black & Decker products. They have a wide selection of tools and accessories, and they often have great deals. You can also find spare parts for the BDS200 on Amazon.
• Best Buy: Best Buy is a good option if you are looking for a brick-and-mortar store where you can buy the BDS200. They have a good selection of Black & Decker tools, and they often have sales. You can also find spare parts for the BDS200 at Best Buy.
• Lowes: Lowes is another good option for finding a brick-and-mortar store where you can buy the BDS200. They have a good selection of Black & Decker tools, and they often have sales. You can also find spare parts for the BDS200 at Lowes.
• eBay: eBay is a great place to find deals on used tools and accessories. You can often find the BDS200 for a fraction of the price of a new one. You can also find spare parts for the BDS200 on eBay.

I hope this helps!

Black & Decker BDS200 Problems and Solutions

some common issues and solutions for the Black & Decker BDS200:

Issue: The saw won't start. Solution: Check the power cord to make sure it's plugged in properly. If it is, try resetting the saw by unplugging it for 30 seconds and then plugging it back in. If the saw still won't start, you may need to replace the fuse.

Issue: The saw blade is not cutting through the material. Solution: Make sure the saw blade is sharp. If it's not, you can sharpen it yourself or take it to a professional. You should also make sure that the saw blade is aligned properly. If it's not, you can adjust the alignment using the instructions in the owner's manual.

Issue: The saw is making a strange noise. Solution: This could be a sign of a problem with the saw blade or the motor. If you hear a strange noise, stop using the saw immediately and contact Black & Decker customer service.

Issue: The saw is overheating. Solution: This is usually caused by using the saw for too long at a high setting. Allow the saw to cool down before using it again. If the saw continues to overheat, you may need to replace the motor.

Issue: The saw is not making a straight cut. Solution: This could be caused by a number of things, including a dull saw blade, an uneven surface, or a misalignment of the saw blade. Make sure the saw blade is sharp and that the surface is level. You should also check the alignment of the saw blade using the instructions in the owner's manual.

I hope this helps!

Black & Decker BDS200 Manual

Black & Decker BDS200 Manual

Safety Information

• Read all safety instructions before using this product.
• Keep this manual for future reference.
• This product is not intended for use by children.
• Do not use this product in wet or damp conditions.
• Do not use this product near flammable materials.
• Do not use this product if it is damaged.
• Disconnect the power cord before cleaning or performing maintenance on this product.
• Store this product in a safe place out of the reach of children.

Before Use

• Make sure the batteries are inserted correctly.
• Turn on the power switch.
• Use the metal detector to locate metal objects.
• The metal detector will emit a sound when it detects a metal object.
• The louder the sound, the closer the metal object is to the metal detector.

Troubleshooting

• If the metal detector is not working, check the batteries.
• If the batteries are new and the metal detector is still not working, contact customer service.

Maintenance

• Keep the metal detector clean and free of debris.
• Do not use harsh chemicals to clean the metal detector.
• Store the metal detector in a cool, dry place.

Warranty

This product is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If this product fails within the warranty period, it will be repaired or replaced free of charge.

Contact Information

For customer service, please contact:

Black & Decker 1701 W. Shure Dr. Towson, MD 21286

1-800-231-1833

Additional Information

• The metal detector is not a toy.
• Do not use the metal detector near electrical wires or other hazardous objects.
• The metal detector is not waterproof.
• Do not use the metal detector in extreme temperatures.

Thank you for choosing Black & Decker.